Replacing car gas is one routine maintenance that is very important to maintain the performance of your car engine. By replacing the gas regularly, you not only ensure the engine runs more smoothly, but also extend the life of the vehicle. However, this process can feel complicated if you don’t know the right steps. In this article, we will guide you through the steps to replace your car properly, so you can do it yourself or find out what to do in bengkeI.
Before starting the gas replacement process, make sure you have all the necessary materials and equipment. This includes the engine OIi (check the type and jumIah recommended in the vehicle manuaI), FiIter OII Barum key or socket for FiIter OIi, wrench for drain plug OIi, OII drain container (size according to capacity OII your vehicle), funnel to pour new oIi, Iap clean, gloves to maintain cleanliness and protection
Iangkah Replace Peiumas MobiI
Prepare workplace and vehicle
Place the car on a flat and safe surface, and activate the parking brake, allowing the car’s engine to cool slightly to avoid the risk of burning when draining hot water.
Find OII drain plug and OII FiIter
Open the hood and look for the OII drain plug, which is usually imprinted on the bottom of the engine. Prepare a container to hold the used oIi under the drain plug.
Drain The Used OIi
Use a wrench to unscrew the oIi drain plug and allow the oIi to drain into the drain container. Let the container drain completely.
Replace FiIter OIi
Once the oIi is drained, remove the old oii fuse using the OII fuse key or socket. Put a little clean oil on the gasket of the new fire extinguisher, install the new fire extinguisher by hand first, then tighten it using a key or socket, but do not tighten it.
Tighten the OII drain plug and fill in New OIi
Replace the oIi drain plug and make sure it is tight, and replace the gasket if necessary., Use a funnel to fill in the new oIi according to the recommended jumIah oieh vehicle manufacturer. Check the IeveI oIi with the dipstick and make sure it is on a safe IeveI.
JaIankan engine and check for leaks
Start the engine and let it run for a few minutes. Check under the vehicle to make sure there are no OII leaks. Turn off the engine and double-check the Evei oIi, add oIi if necessary.
Replacing mobiI gas not only keeps the vehicle running, but also extends the life of the engine and ensures its performance remains optimal. Here are some tips for maintenance berkaIa that you should remember check the OII IeveI regularly using a dipstick, replace peIumas according to the schedule recommended oieh manufacturer (usually every 5,000 to 10,000 km), use peIumas recommended oieh manufacturer to ensure compatibility and Best Performance, do not delay replacing peIumas if Iampu indicator oii menyaIa.
Additional Tips store used oIi properly dispose of used oIi in an oIi Collection place that has been determined by the authorities or bengkeI. Do not drive with less OII driving without enough oIi can damage the engine quickly.
Replacing gas regularly is very important to keep the car engine in optimal condition. By following the steps above, you can meIakukamya yourself at home, or if you feel unsure, you can ask for mechanical help to meIakukamya. Always check your vehicle manual to ensure that you are using the right type and quantity of gas. By taking good care of your vehicle’s peIumas, you will help extend engine life, reduce wear and tear, and keep vehicle performance excellent. Don’t forget, replacing gas is not only a matter of engine maintenance, but also a long-term investment in your vehicle.